Country Manor Shake

Country Manor Shake is a heavily formed aluminum roofing system designed to capture the beauty of hand-split cedar shakes. Its tough aluminum alloy, quality hI-R reflective finish, and fully interlocking design withstand snow, rain, and even winds of up to 120 mph. The integral airspace between the metal and the roof deck creates a thermal break to increase building energy performance.

Pre-Formed Flashings And Accessories:

  • Hip and ridge caps
  • Self-cleaning valley
  • Starter strip and drip edge
  • Gable edge trim and gable caps
  • Sidewall flashing
  • Vent pipe flashing
  • Matching coil stock
  • Color-matched butyl sealant
  • RoofAquaGuard underlayment
  • Aluminum screw shank nails
  • Optional snow guards
  • Available foam inserts for high traffic areas
  • Panel Measurements: 48″ x 12″; 25 panels per 100 square feet;

Weight: 46 pounds per square

Each Country Manor Shake panel is formed with the look of eight individual and deeply-grained simulated shakes of varying height, width, and thickness to duplicate the random three-dimensional appearance of real cedar shakes. The product’s low weight allows installation over many existing roofs.

Aluminum: .019” thick roofing panels; Matching accessories are .019” or .024” thick aluminum

All aluminum panels and accessories are made of 3105-H25 aluminum sheet (minimum tensile strength 26,000 psi; minimum yield strength 22,000 psi) or equivalent. Made from quality, up to 99% recycled aluminum, the majority of which is post-consumer.

Minimum Roof Pitch: 4:12 in snow areas, or 3:12 in standard conditions.

Finish: Industry-leading PVDF coating technology

Country Manor Shake panels and factory-formed accessories are protected with a two-coat, high-performance Kynar 500® or Hylar 5000® PVDF resin-based finishes, which includes a protective primer and baked-on high-performance topcoat to resist chalking, fading, and deterioration. The finish includes reflective pigment to enhance the product’s energy efficiency.

Country Manor Shake is a Metal Construction Association Certified Metal Roofing Product.

Limited Lifetime Warranty

Classic Metal Roofing Systems offers the industry’s most comprehensive lifetime limited warranty available. Our warranty guarantees your roof will not chip, peel, flake, blister, burn, rust, split, or crack with age. Additionally, our paint systems carry a non-pro-rated 30-Year Limited Warranty ensuring your roof’s finish will resist fade and chalk. And if you sell your home the warranty transfers to all future owners, extending 40 years from the point of installation. If your roof does experience a warranted failure, we will not only cover the cost of materials but workmanship to repair or replace your roof.

We provide a warranty of this level and coverage because our products and technology are proven. In over 30 years of roofing thousands of homes across the world, we have had fewer than ten warranted claims. We are proud of that track record and are committed to set new standards of excellence for years to come.

WordPress Video Lightbox Plugin
Scroll to Top